Main Menu
· Home Page
· News
· Forums
· Sorento of the Month
· Photo Gallery
· Do It Yourself
· Reviews
· Downloads
· Links Directory
· Chat Room
 

 

 
 
 
 
 
 

         Gauge Removal/Replacement
            
By Paddywagon05

  • Remove the two screws at top of housing and pull towards you at the bottom, just two lugs.


     
  • Slide out at either side and remove


     
  • Remove the two screws at each side [only shown one side]


     
  • Remove the two screws from top  brackets, the unit is now free to be pulled forward.


     
  • Remove gold colored screws to take off brackets left/right, this will stop you scratching the steering housing, as I did the first time.


     
  • The unit can now be pulled forward and unclip the three main connectors, be careful not to scratch circuits.


     
  • Unit removed showing female connectors and clips which retain the front glass.


     
  • Unit showing all bulb holders, the four larger ones are the main 5w wedge bulbs I replaced in blue color.


     
  • The unit with the front plastic removed for putting on the Gauge replacements and or Gauge Rings.


     
  • Final look day & night



 



Copyright 2005 © Sorentosite.com
Design & Programming by O'Farril Web Design